[Snek] [keith-packard/snek] fd609b: chips/samd21: Allow devices to have as few as 17 G...

Keith Packard noreply at github.com
Sat Jun 29 17:22:15 PDT 2019


  Branch: refs/heads/master
  Home:   https://github.com/keith-packard/snek
  Commit: fd609b38e20ce00e572b715984d3b82c38553354
      https://github.com/keith-packard/snek/commit/fd609b38e20ce00e572b715984d3b82c38553354
  Author: Keith Packard <keithp at keithp.com>
  Date:   2019-06-29 (Sat, 29 Jun 2019)

  Changed paths:
    M chips/samd21/snek-gpio.c

  Log Message:
  -----------
  chips/samd21: Allow devices to have as few as 17 GPIOs

There were some missing #ifdefs in snek-gpio.c. For devices with even
fewer GPIOs, adding more #ifdefs is all that should be required.

Signed-off-by: Keith Packard <keithp at keithp.com>


  Commit: 3b80f7e501c338f8bb9c2fc8aff956cb4ade82df
      https://github.com/keith-packard/snek/commit/3b80f7e501c338f8bb9c2fc8aff956cb4ade82df
  Author: Keith Packard <keithp at keithp.com>
  Date:   2019-06-29 (Sat, 29 Jun 2019)

  Changed paths:
    A ports/snekboard/.gitignore
    A ports/snekboard/Makefile
    A ports/snekboard/ao-pins.h
    A ports/snekboard/bootloader-snekboard-v3.7.0.bin
    A ports/snekboard/snek-board.builtin
    M snek-install.defs

  Log Message:
  -----------
  ports/snekboard: Add snekboard port

This is a custom SAMD21G board with 9V motor controllers designed to
operate Lego devices.

Signed-off-by: Keith Packard <keithp at keithp.com>


Compare: https://github.com/keith-packard/snek/compare/ad2e91df43b9...3b80f7e501c3


More information about the Snek mailing list